Configuring the pilot
Setting up the pilot for your application
Connect the pilot so your network and turn it on.
Log in to the pilot with an ssh client.
SSH clients are preinstalled on Linux and OSX for windows you can install the putty client
ssh firstname.lastname@example.org Login: pi Password: raspberry
Once logged in run the command
$ sudo pilot setup
It will display a list of attached modules that might look like this:
You are all setup and ready to build your application.
Depending on the module you inserted, there is further information available by typing:
$ pilot module
If you want to connect to the pilot cloud make sure to setup pilotnode.